Track system

TS0.85

Track, 0.85 / 33"
TS1.15

Track, 1.15m / 45"
TS1.7

TS-track 1.7 m /67"
TS2.0

Track, 2.0 m / 79"
TS2.3

Track, 2.3 m / 90.5"
TS3.45

Track 3.45 m / 135"
TF2S Track foot

Track foot, symmetric for TS-track
TFAB Angle cutting attachment

Angle cutting attachment, to be bolted to TF2S Track foot for TS-track
TSS300 Joint block

Joint block for TS-track
TP3 Trackstop

Track stop for TS-track Please note: For safety reasons one track stop must be used in each end of the track.
BTS4

Base plate for TS-track, rectangular, 220 x320 mm
WT-BTS4

Wheel kit for BTS-4 base plate.
BTS5

Base plate for TS-track, rectangular 380 x 290 mm. For wire sawing and heavy dury drilling.
WT-BTS5-200

Wheel kit for BTS5, Ø 200mm wheels
WT-BTS5-300

Wheel kit for BTS5 base plate, Ø 300 mm wheels
HL-TS1

Handle with levels. For Pentruder universal drill rig.
RST-TS1

Rear support for TS-track
CEG-PDT1

Carriage CEG-PDT1 pivoting head for TS track. Pivots 360 degrees. Rear support included.
CT-CEL

Back support for CEL-TS
CEL-TS

Carriage for line and corner drilling with TS track.
CEG-E-3P8

3P8 wire saw upper carriage, which glides on the track with bronze liners. Electric automatic feed. Total gear ratio 5000:1. Max feed speed 0.4 m/min
CEG-E-MD1

Gliding carriage for both MD1 core drill and lower carriage for 3P8 wire saw, electric feed, total ratio 2500:1. Max feed 0.8m/min.
CEG-M25

Gliding carriage for both MD1 core drill and lower carriage for 3P8 wire saw, manual feed, gear ratio 25:1
CER-M3-MD1

Roller type carriage for drilling with the MD1 Core drill. QDC coupling. Manual feed, ger ratio 3:1.
CER-M3-U

Universal roller type carriage for drilling. Manual feed, gear ratio 3:1.
CEL-CN

Line and corner drilling carriage for TS Track and CN 70 mm column.
Drill template

Drill template for placing the track foot correctly according to planned cut.
Drill template - double

Drill template for placing the track foot correctly according to planned cut.